Clutch 1 Blocks For POS N/P Or D/R

P17BD

Diagnostic information - PDK

Clutch 1 blocks for POS N/P or D/R

Diagnostic conditions
The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are then tested and any faults are stored.

- Ignition on
- The following faults are not detected: P0843, P181A
- The following faults are not detected: P1706, P1707

Fault effects
- Only gears 2, 4 and 6 are possible
- Transmission limp-home indication in instrument cluster control unit