P0108

P0108

Diagnosis information - Control unit DME (DFI)

Intake manifold pressure sensor: Electrical fault

Diagnostic conditions
- Ignition on or Engine running
- none of the following faults stored: P0234

Possible fault causes
- Short circuit to B+/ground/between lines or open circuit in the lines
- Ground supply defective
- Intake manifold pressure sensor Faulty

- Turbo only
- Only if fault P1638 or P1639 (Boost-pressure sensor) is entered at the same time:
- Vacuum hose leaks to Frequency valve, boost control or Wastegate
- Frequency valve, boost control leaks
- Wastegate leaks

Fault effects
- Substitute value from model