P0190

P019000

Diagnostic information - DME control unit

Fuel pressure sensor

DANGER
High voltage.
Death or severe injuries due to high voltage or high current.

- De-energise the vehicle in accordance with the guidelines.
- Work must not be performed on parts carrying a high voltage.

The control unit must be active in order to test internal function sequences and diagnosable inputs/outputs.
In the event of a fault, check whether the fault is permanently >present<. To perform the check, erase the fault memory, meet the diagnostic conditions and read out the fault memory again.

NOTE:
- Check system for leaks.
- Torque reduction.
- Check functioning of high-pressure pump.
- Check functioning of metering unit and pressure-regulating valve.
- Engine failure possible.

Diagnostic conditions
- Idling

Possible fault causes
- Short circuit to B+
- Short circuit to ground
- Signal implausible