P0201

P020100

Diagnosis information DME control unit

Injection valve Cylinder 1

DANGER
High voltage.
Death or severe injuries due to high voltage or high current.

- De-energise the vehicle in accordance with the guidelines.
- Work must not be performed on parts carrying a high voltage.

The control unit must be active in order to test internal function sequences and diagnosable inputs/outputs.
In the event of a fault, check whether the fault is permanently >present<. To perform the check, erase the fault memory, meet the diagnostic conditions and read out the fault memory again.

Diagnostic conditions
- Engine running

Possible fault causes
- Loose contact or corrosion on connectors or lines
- Short circuit to B+/ground/between lines or open circuit in the lines (Activation)
- Injection valve Faulty