Power Locks - Acoustic Feedback Deactivation
9Service
3/11
ENU
9449
Jan 26, 2011
The present document was valid at the time of print. A later version may be available online
Locking Doors: Coding Acoustic Feedback (acoustic signal)
(3/11)
Tools
Model year:
as of 2011
Vehicle Type:
Cayenne/Cayenne S/Cayenne S Hybrid/Cayenne Turbo
Concerns:
- Front-end electronics control unit
- Acoustic feedback (acoustic signal) when locking doors
Information:
Customer request:
De-activate "Acoustic feedback while locking" function.
The "Acoustic feedback while locking" function is activated as standard during vehicle delivery for vehicles in USA, Canada and Mexico.
This function is not activated on vehicles for other countries.
Action Required:
From now on, this function can be deactivated .... or re-activated as required - at the request of the customer using PIWIS Tester II with software version 7.200 (or higher) installed.
software version 7.200 is available online from December 16, 2010.
Tools:
PIWIS Tester II 9818 with software version 7.200 (or higher)
Work Procedure:
Applies only to vehicles in USA, Canada and Mexico: De-activate Acoustic feedback while locking" function.
Initial situation: Battery charger and PIWIS Tester II are connected to the vehicle.
1 Select --> Front-end electronics control unit --> 'Codings/adaptations' --> Customer-specific settings --> 'Acoustic feedback while locking (Only permitted for North America)'.
2 Select --> No
The message "Acoustic feedback is deactivated" will be displayed when coding is complete. End of action required.
If you want to activate the function again, select "Yes". The message Acoustic feedback is activated" will be displayed when coding is complete.
92AAG1, 92AAG7, 92AAH1, 92AA11, 92AAL1, 92AAM1, 92AAT1
Model year as of 2011
C02, C36
Disclaimer