P0371

P0371

Diagnosis information - Control unit DME (DFI)

Sensor Crankshaft

Diagnostic conditions
- Engine running
- only PDK:
- then engine stop, at:
- Start/stop system

- then Engine start, at:
- Start/stop system

Possible fault causes
- Loose contact or corrosion on connectors or lines
- Short circuit to B+/ground/between lines or open circuit in the lines
- Phase sensor wheel Faulty (damaged / bent)
- Sensor Crankshaft not installed or installed incorrectly
- Sensor Crankshaft Faulty

Fault setting condition(s)
- Signal not OK (missing or implausible)