Ride Height Adjustment

Ride height on these vehicles is not adjustable. Front and rear ride height must be measured in order to calculate the angle of the floor pan, which is used to determine the correct caster angle. Measure ride height and determine floor pan angle as follows:
1. Place unloaded vehicle on flat surface.

Fig. 2 Ride height measurements.:

2. Measure and record front ride height (H2) between front side rail and ground at center line of front wheels, Fig. 2.

Fig. 2 Ride height measurements.:

Fig. 3 Measuring rear suspension height.:

3. Measure and record rear ride height (H5) between side arm bolt and ground, Figs. 2 and 3.
4. Calculate the difference between the measurements and record difference to determine correct caster angle.