Rev 1

�O(YParking Lights With/Without Side Marker Lights:

WIRING DIAGRAM

Parking Lights With/without Side Marker Lights:

COMPONENT LOCATION VIEW

Parking Lights With/without Side Marker Lights: Component ID:

COMPONENT ID
10 Lights switch on dashboard between steering wheel and driver's door.
13 Parking lights in the front light cluster.
14 Rear lights in the rear light cluster.
15 Number plate lighting on the tailgate.
16 Rheostat, lighting for controls, on dashboard between the steering wheel and driver's door.
22A Fuse board behind the cover flap in the glove box.
27 Direction indicator lamps, left-hand side, in front and rear light clusters.
28 Direction indicator lamps, right-hand side, in front and rear light clusters.
30 Brake lights in rear light clusters.
32 Rear light bulbs
CD: in rear light clusters.
CS: in tailgate light fitting.
33 Rear fog light
CD: in rear light cluster.
CS: In tailgate light fitting.
47 Main instrument display panel in the dashboard.
47V Lights-on indicator lamp in the main instrument display panel.
159 Distribution terminal (+15 circuit) in main fuse box behind the glove box.
213 Pictogram in the main instrument display panel.
228A Filament monitor, rear lamps, in the luggage compartment on the left-hand side.
234 Side marker lights in the front light clusters.
258 Connection for trailer lighting, in luggage compartment on the
(H8-5) left below the light cluster.
418 Rear light fitting, CS, in the tailgate.

2-Pin Connector
H2-62 In the tailgate on the left-hand side.

6-Pin Connector
H6-4 In the tailgate on the left-hand side beside the rear window.

8-Pin Connector
H8-4 By the left-hand rear wheel housing.

24-Pin Connector
H24-2 Behind the left-hand headlamp.

Grounding Points
G3 Grounding point, luggage compartment, on the left-hand side by the left-hand rear light cluster.
G5 Grounding point, rear seat, on left-hand side.
G8 Grounding point, dashboard, by the left-hand front loudspeaker socket.
G29 Grounding point, luggage compartment, on the right-hand side by the right-hand rear light cluster.
G30 Grounding point, left-hand structural member behind the left-hand headlamp.
G31 Grounding point, right-hand structural member behind the right-hand headlamp.

DESCRIPTION OF OPERATION
The parking lights are switched on and off by means of lights switch 10 which is always supplied with current. See Power Supply (+30 circuit).

When the lights switch is in position 1, current is supplied to parking lights 13 via fuses 29 and 30.

Both rear lights 14 are also supplied with current from these fuses, but via filament monitor 228A.

If any of the rear light bulbs fails, connection C1 will be grounded. Since connection 9 on pictogram 213 receives positive voltage (from the ignition switch), the indicator lamps for rear lights and the central warning lamp will light up. See Pictogram-Filament Monitor.

Number plate lighting 15 and the parking lights on a trailer are always supplied with current when the parking lights are on. However, this current supply does not go via the filament monitor.

The parking lights on a trailer are supplied with current via connector 258 (H8-5).

Side marker lights 234 are fitted on cars for certain markets.

In certain markets an indicator lamp (47V) is also fitted to show when the lights are on.

FAULT DIAGNOSIS HINTS
The parking lights are switched on by turning lights switch 10 to position 1.
1. Check that fuses 29 and 30 are intact and supplied with current.
2. Check that the bulbs are intact and supplied with current. Check the grounding of each lamp.
3. Check that switch 10 and filament monitor 228A are in working order by taking readings on each connection.
4. Check the connectors, wiring harness and ground connections.

IMPORTANT: When changing the bulbs, make sure that the new bulbs are of the correct rating. Otherwise, the lamps in the pictogram may light up due to imbalance in the filament monitor coil