Other Markets

In some of the other markets, dipped beams are used as daylight driving lights. The lamps light up when the ignition switch is turned to the Drive position. The parking lights, rear lights and number plate lighting also light up.

When ignition switch 20 is in the Drive position and light switch 10 is in the 0 position, current is supplied via fuse 31, light switch 10, filament monitor 228B and fuses 5 and 6 to dipped beam lamps 12.

In certain markets an indicator lamp (47V) is also fitted to show when the lights are on.

Filament Monitor
If any of the full or dipped beam lamps breaks, the dipped beam relay in the filament monitor operates and connection C2 is grounded. Since connection 9 of pictogram 213 receives positive voltage (from the ignition switch), the indicator lamps for lighting and the central warning lamp light up. See also the Pictogram-Filament Monitor.