Seats: Service Precautions

HANDLING CONTROL MODULES





All control modules are more or less sensitive to static electricity and if handled carelessly or incorrectly may be damaged so seriously that they no longer work properly. It is therefore important to ensure that the following rules are observed at all times when a control module is removed or replaced for any reason.

- Avoid unplugging or removing a control module unless absolutely necessary.

- Never touch the connector pins and never place the control module in such a way that the connector pins may come into contact with foreign objects.

- Before unpacking a new control module, ground the packaging to the car body. Open the packaging as shortly as possible before installing the control module.

- Avoid wearing clothes made of synthetic (man-made) fibers.

- When handling or working on control modules it is important to ground yourself from time to time. This is particularly important when you have been sitting in the car, when changing your position, or when moving, around the car. It is even more important in a climate with extremely dry air (e.g. during the winter in cold markets).

- Furthermore, always handle control modules which are suspected of being defective in the same manner. This will greatly improve the chances of determining the cause of the fault.