Wheel Alignment, Rear - Service Manual Corrections
CATEGORYSuspension
SECTION
7
ISSUE
03/97-0741
PAGE
10
CODE
732
Subject:
Amendment to Service Manual
Section 7 Suspension, Wheels
Application: 1994-900
Some of the dimensions relating the rear suspension have been changed. See the Table below.
Rear wheel alignment
Toe-in (measured at wheel rim) mm (in) 1 +/- 2 (0.039 +/- 0.079)
Camber degrees (°) -1.7 +/- 0.3
Please record these amended figures in the table on page 027-2 of Service Manual Section 7 Suspension, wheels. This information is correctly indicated on page 149 of Service Manual 0:2 Technical Data, M1994-97 (P/N 0368415).