User Programming, ACC

User Programming







The ACC control module can be programmed by the user. Manual selections are stored in the control module so that they are selected when the car is started. Functions not programmed by the user will be set automatically.

User programming is accessed by pressing OFF and rear window heating simultaneously.

The program is cancelled by pressing AUTO and fan down simultaneously. In both cases, the display lighting will confirm the selections by going out for 250 ms.

The control module processor is active for 10 minutes after turning off the ignition. If the ignition is turned on within these 10 minutes, the control module will retain any manual selections made during the latest trip. After 10 minutes the control module will start with user-programmed selections.


NOTE: Experience shows that half the ACC control modules returned during the warranty period have not been defective but user-programmed. Therefore, it is important that this function is explained to the customer.







Adjustment
The ACC unit can be adjusted with the diagnostics tool to always start with any manual selections made during the latest trip.


Extended User-programming







The ACC control module can also be programmed by the user so that certain automatic control functions can be changed. These selections are stored and used by the control module until the program is cancelled. Programming and cancelling the program are both selected by pressing ECON, air recirculation or rear window heating for longer than 1.2 seconds. In all three cases, the selection will be confirmed by the selected function symbol flashing 4 times and a message being displayed on SID for 5 seconds. The various extended functions are explained below:

ECON
The function is automatically selected when the outside temperature is below 10°C at the same time as the solar intensity is lower than 351 W/sq.m and returns when the temperature exceeds 13°C or if the solar intensity is higher than 351 W/sq.m


NOTE: The ACC control module does not accept increased temperatures unless the vehicle speed exceeds 30 km/h.

Adjustment
The ACC unit can be adjusted with the diagnostics tool so that ECON is selected at other temperatures.

Air Recirculation


This function is selected automatically when the vehicle speed is below 10 km/h and disengages when the vehicle speed exceeds 30 km/h.

Observe that fresh air is automatically selected if the temperature is below +7 °C. Returns to recirculation when the temperature exceeds +10 °C.

Adjustment
The ACC unit can be adjusted with the diagnostics tool to automatically select air recirculation at other speeds.

Electrically Heated Rear Window And Door Mirrors
The control module requests that the electrically heated rear window is engaged within 5 seconds after the engine has been started if the outside temperature is below 5 °C and at the same time the cabin temperature is below 10 °C. The engagement time depends on the outside temperature.

At +5 °C the time is 5 minutes and at lower temperatures the time is increased to max 10 minutes when the outside temperature is lower than -10 °C.

NOTE: Experience shows that half the ACC control modules returned during the warranty period have not been defective but user-programmed. Therefore, it is important that this function is explained to the customer.