Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Registration of Transmitter With Vehicle Diagnostic Interface
REPLACEMENT
REGISTRATION OF TRANSMITTER WITH VEHICLE DIAGNOSTIC INTERFACE
NOTE:
- A maximum of four transmitter can be registered for each individual vehicle.
- When replacing or adding the transmitter, new registration of transmitter is necessary.
Connect the Vehicle Diagnostic Interface to vehicle.
Turn the ignition switch to ON.
From the <> on the Vehicle Diagnostic Interface, select the {2. Each System Check}->{Keyless unit mode}->{1. Keyless ID registration}.
Input the 8-digit ID number from the left attached to the plastic bag of transmitter or circuit board inside transmitter.
NOTE: Press the [▴] key on the Vehicle Diagnostic Interface to increase the number, and the [▾] key to decrease. Press the [<] key to move to the digit in the left, and [>] to the right.
The ID number you have entered will be shown. Make sure that the ID number shown is the same as that of plastic bag.
Press the [YES] key if the ID number is correct. Press the [NO] key if incorrect, to return to the step 3) and try again.
<> will be displayed and registration started.
<> will be shown when the process is done.
To end, select the <>, and press the [NO] key to return to {1. Keyless ID registration}. If there are additional transmitters to be registered, select the <>, and press the [YES] key to return to the step 3).
NOTE:
- If the registration fails, <> will be shown. Press the [YES] key to return to the {1. Keyless ID registration} and retry from the step 2).
- <> is shown on the Vehicle Diagnostic Interface when four transmitters have been registered. Press the [NO] key to return to {1. Keyless ID registration}.