57. 1ST Clutch Piston Installation
1st Clutch Piston Installation1. Install inner O-ring seals in the 1st clutch piston (715) as follows:
- Upper, forward inner groove, O-ring seal (717a)
- Lower, rear inner groove, O-ring seal (717b)
2. Install an outer O-ring seal (716) in the outer groove of the 1st clutch piston (715).
3. Install the 1st clutch piston (715) into the 1st and coast clutch housing (718) by applying hand pressure and rotating the 1st clutch piston assembly. Ensure proper O-ring seating. Do not pinch the O-ring seal by installing the piston with excessive force.