Instrument Panel (IP) - Outer Trim Cover Replacement - Left
Instrument Panel (I/P) Outer Trim Cover Replacement - Left
Removal Procedure
1. Remove the screws from the steering column filler panel.
2. Remove the filler panel by pulling until the trim clips disengage.
3. Remove the outer trim panel by pulling on the panel.
4. Disconnect the electrical connector from the door jamb switch.
5. Remove the right outer trim panel.
Installation Procedure
1. Connect the electrical connector to the door jamb switch.
2. Position the outer trim panel.
3. Push to install the panel.
4. Position the steering column filler panel.
5. Push to install the filler panel.
Notice: Refer to Fastener Notice in Cautions and Notices.
6. Install the screws to the steering panel filler panel.
Tighten the screws to 2.5 N.m (22 lb in).