Dome Lamp: Service and Repair
DOME LAMP REPLACEMENTREMOVAL PROCEDURE
1. Using a flat-bladed tool, remove the lamp lens from the dome lamp assembly.
2. Using a small flat-bladed tool, disengage the dome lamp attaching clips by gently prying at each side of the retaining tab while pulling the tab off of the headliner.
3. Pull the forward edge of the dome lamp downward and rearward to disengage the lamp from the headliner.
4. Disconnect the dome lamp electrical connector.
5. Remove the dome lamp.
INSTALLATION PROCEDURE
1. Position the dome lamp to the headliner. Connect the dome lamp electrical harness.
2. Slide the dome lamp into place.
3. Snap the dome lamp clips into the closed position.
4. Snap the lens into the dome lamp assembly.