Air Cleaner Housing: Service and Repair
AIR CLEANER ASSEMBLY REPLACEMENTREMOVAL PROCEDURE
1. Disconnect the intake air temperature (IAT) sensor connector.
2. Loosen the clamp at the air cleaner assembly.
3. Remove the outlet resonator duct from the air cleaner.
4. Loosen the clamp at throttle body assembly.
5. Disconnect PCV fresh air vent hose at cam cover.
6. Remove the air outlet resonator/bolt.
7. Remove the air cleaner attachment bolt.
8. Remove the air cleaner assembly.
INSTALLATION PROCEDURE
1. Install the air cleaner assembly into position.
2. Install the air cleaner attachment bolt.
Tighten the air cleaner-to-support bracket bolt 4 cylinder to 10 N.m (89 lb in).
3. Position the outlet resonator/duct assembly.
4. Connect the PCV fresh air vent hose assembly.
5. Tighten the clamp at throttle body assembly.
6. Position outlet resonator/duct assembly up with support bracket and install push-pin.
7. Tighten the clamp at the air cleaner assembly.
8. Connect the intake air temperature (IAT) sensor connector.