5. Control Valve Body Assembly Removal
Control Valve Body Assembly Removal1. Slide the grey locking clip in order to unlock the connector for the input and output speed sensor assembly.
2. Press the connector tab and remove the connector for the input and output speed sensor assembly from the control valve body assembly.
3. Remove the bolt and manual shaft detent assembly from the control valve body assembly.
4. Disconnect the manual valve link assembly from the manual valve.
5. Remove the 3 silver bolts from the control valve body assembly.
Important: Use care when removing the control valve body assembly. The control solenoid valve assembly and the control valve body assembly may separate.
6. Remove the 15 black bolts from the control valve body assembly.
7. Remove the control valve body assembly from the transmission case assembly.
8. Remove the spacer plate assembly. Discard the spacer plate assembly.