Transmission Mount Replacement - Rear
Transmission Mount Replacement - RearRemoval Procedure
1. Raise and support the vehicle.
2. Remove the transmission mount through bolt.
3. Remove the frame to transmission mount bolts.
4. Remove the transmission mount.
Installation Procedure
Notice: Refer to Fastener Notice in Cautions and Notices.
1. Install the mount to the frame.
- Tighten the frame to transmission mount bolts to 50 Nm (37 ft. lbs.).
2. Install the transmission mount through bolt.
- Tighten the bolt to 110 Nm (81 ft. lbs.).
3. Lower the vehicle.
4. Perform the powertrain mount balance procedure.