DTC 11

DTC 11 - TRANSAXLE DIAGNOSTIC TROUBLE CODES PRESENT
The powertrain control module, used on vehicles equipped with automatic transaxles, contains an engine control module (EC) and a transaxle control module (TC). These control modules communicate internally over a serial peripheral interface (SPI) bus. When the transaxle control module (TC) detects a malfunction in the automatic transaxle, a DTC is stored in the transaxle control module's memory and an indication is sent to the engine control module to turn on the malfunction indicator lamp. If the DLC is grounded, the transaxle diagnostic trouble codes flash on the HOT light telltale located in the instrument cluster. (Refer to Auto Transaxle diagnostic trouble codes.) Testing and Inspection

DTC PARAMETERS
^ DTC 11 will set if the PCM/TC has set a transaxle diagnostic trouble code.

DIAGNOSTIC AIDS
^ Search the scan tool for stored transaxle codes. Select TCM trouble codes.

When the PCM/TC codes are cleared, DTC 11 will also be cleared from general information but not from Malfunction history.

^ Code 11 will not set if transaxle flags are present.