Removal

IMPORTANT:
Removing the seat using the following sequence will aid in reassembly of the unit. DO NOT activate the E-Z entry feature by pulling the recliner release lever on the side of the seat at any time during removal and install procedures.





1. Remove two front bolts from passenger seat in the following order:

a. Front inboard

b. Front outboard

2. Move passenger seat to full forward position by activating the seat adjuster lever.

3. Remove two rear bolts from front passenger seat in the following order:

a. Rear outboard

b. Rear inboard

4. Remove passenger seat and place on a clean protected work surface.





5. Remove two screws from the passenger seat adjuster finish inner cover and remove the passenger seat adjuster finish inner cover.

6. Remove bolt from passenger seat side mount buckle and remove passenger seat side mount buckle.





7. Remove two passenger seat inner adjuster bolts.





8. Remove two passenger seat inboard recliner bolts.





9. Remove passenger seat adjuster linkage wire from passenger seat inner adjuster.





10. Remove retaining clip from E-Z entry cable at front of the inboard seat adjuster. Remove the inboard seat adjuster and discard.