Valve Cover: Service and Repair

NOTE: Engines are assembled with black composite cam covers.

REMOVAL
1. Remove Positive Crankcase Ventilation (PVC) valve hose.






2. Remove cam cover fasteners.
3. Remove the cam cover assembly.

INSTALLATION






NOTE: Inspect the cam cover isolations for cracks. Replace the isolators if deterioration exist. Gaskets over one year old may take a set and should be replaced. Gaskets under one year old do not need replacement. A small drop of RTV must be installed at the two T-joints whenever the cam cover is installed.

1. Install new cam cover gaskets, if removed.
2. Install the cam cover assembly.
3. Install the PVC valve hose.