Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Damper Bench Assembly to Lower Bracket
(Required for all vehicles)
1. Remove the first rubber grommet and the first steel washer from the damper shaft.
2. Install the damper shaft into the appropriate lower bracket; install the rubber grommet and then the steel washer onto the damper shaft.
3. Install the M6 nut to the damper shaft. To tighten the nut, hold the "flats" on the damper shaft with a 7 mm wrench.
Torque: 10 N.m (89 in-lbs)
4. After damper is assembled, proceed to "Battery and Battery Tray Removal."