Intake Manifold Torque & Sequence
Throttle Body-to-Air Intake Manifold: 31 Nm (23 ft. lbs.)EGR Valve to Head/Intake Manifold-Bolt: 30 Nm (22 ft. lbs.)
Heater Outlet-to-Intake Manifold: 26 Nm (19 ft. lbs.)
Studs-to
Head: 12 Nm (106 inch lbs.)
Head (P/S Bracket): 30 Nm (22 ft. lbs.)
Support Bracket-to
Block (LH): 30 Nm (22 ft. lbs.)
Block (RH): 55 Nm (41 ft. lbs.)
Manifold: 30 Nm (22 ft. lbs.)
Intake Manifold Bolt Tightening Sequence:
Intake Nuts
Tighten the intake nuts sequentially. Torque to 30 Nm (22 ft. lbs.).