Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously

Power Window Rear Door Switch

Power Window Rear Door Switch: Removal/Installation:

REMOVAL
1. Remove screw from center of inside door handle assembly.
2. Slide door handle assembly forward while pulling outward from trim panel.
3. Disconnect electrical connector.
4. Remove switch from door handle assembly by releasing retainer tabs.

INSTALLATION
1. Install switch to door handle assembly.
2. Connect electrical connector.
3. Position door handle assembly into trim panel.
4. Install screw in handle and tighten
5. Check operation switch.
Torque: 2.5 N^m (22 in-lbs)