Controller Bulbs and Wiring Harness

CONTROLLER BULB

REMOVAL





1. Remove HVAC controller.





2. Turn bulb socket counterclockwise to remove from control.
3. Wrap a small piece of scotch tape around bulb and pull out of socket.

INSTALLATION

1. Push bulb straight into socket.
2. Align tabs on socket with control and insert socket into control.
3. Turn clockwise to lock.
4. Install HVAC controller.

WIRING HARNESS





REMOVAL

1. Remove HVAC controller
2. Remove bulb sockets, electrical connector and wiring harness from HVAC control.

INSTALLATION

1. Install wiring harness, electrical connector and bulb sockets to control.
2. Install HVAC controller.