Transaxle Oil Cooler Line Assembly

REMOVAL





CAUTION: MAKE SURE THE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED ON THE HOIST.

1. Place drain pan or suitable container under vehicle.
2. Position vehicle on a hoist.
3. Use line wrench to remove upper transaxle cooler line from radiator.





4. Raise vehicle.
5. Use a line wrench to remove lower transaxle cooler line from radiator.





6. Remove transaxle oil cooler line assembly nut from transaxle.
7. Remove transaxle oil cooler line assembly from vehicle.

INSTALLATION





1. Install transaxle oil cooler line assembly to transaxle.
2. Install transaxle oil cooler line assembly nut.
Torque: 8 Nm (71 inch lbs.)





3. Use a line wrench to install lower transaxle cooler line to radiator.
Torque: 25 Nm (18 ft. lbs.)
4. Lower vehicle.





5. Use line wrench to install upper transaxle cooler line to radiator.
Torque: 25 Nm (18 ft. lbs.)
6. Start engine and check for leaks.
7. Check for proper fluid level using the "Transaxle Fluid Level Checking Procedure".