2. Transaxle Holding Fixture

Tools Required
- J43707 Transaxle Support Fixture
- J3289-20 Support Fixture Base
- J43964 Engine Stand Fixture Adapter





CAUTION: TO REDUCE THE POSSIBILITY OF PERSONAL INJURY OR TRANSAXLE DAMAGE, MAKE SURE, WHEN DOING THE NEXT STEP, THAT ALL OF THE BOLTS FOR THE SUPPORT FIXTURE ARE INSTALLED, AND THAT BOLTS ARE TIGHTENED TO 11 Nm (98 inch lbs.).

1. Install transaxle support fixture J43707 onto transaxle.
2. Torque support fixture bolts.
Torque: 11 Nm (97 inch lbs.)
3. Install transaxle and support fixture into either J43964 engine stand fixture adapter (not shown), or J3289-20 fixture base (shown).
4. Position transaxle with side cover facing down.
5. Insert pin into the J3289-20 fixture base in order to lock unit into place.