Rear Windshield Washer System Center Hose

REMOVAL
1. Inspect headliner for damp, stained or wet areas along drivers side of headliner.
2. If damp, stained, wet or suspected area is found, remove headliner. (Refer to "Headliner Removal" procedure.)
3. Locate damaged or blocked section of hose using a low pressure air supply (5 psi or less). Blow through hose to locate leakage or blockage.

INSTALLATION
1. If replacement is necessary, use tie straps to secure new hose section to old hose.
2. Install headliner.
3. Verify system operation.