Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rear Windshield Washer System Front Hose




REMOVAL
1. Open hood and disconnect front washer hose at pump and plug outlet port.
2. Remove lower Close out panel (hush panel).
3. Remove windshield pillar trim panel.
4. Install new hose onto old hose at windshield pillar by forcing each end of hose over a 6 mm (1/4 in.) or equivalent.
5. Tape around joint with electrical tape where the two hoses meet to additionally secure.

INSTALLATION
1. Pull on old hose under hood to route new hose in place.
2. Connect new hose to pump and windshield pillar.
3. Install windshield pillar trim.
4. Test washer system for proper operation.