Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
P0560
The ECM monitors battery voltage continuously after power-up. This code will set if the ECM sees the voltage to be below 2.5 volts. If battery voltage is not actually low, but because of a circuit fault, the ECM sees it as low, 14 volts will be selected as a default battery voltage.DTC PARAMETERS
This DTC P0560 will set when:
^ Vehicle Speed greater than 0 mph
^ Engine running greater than 3 mm.
^ Battery voltage less than 2.5 volts
^ Above condition met for 200 milliseconds
DTC P0560 is a (type D) DTC.
DIAGNOSTIC AIDS
Possible cause:
ECM internal failure