66. Intake Plenum Installation

1. Install throttle body gasket to plenum.
2. Install throttle body to plenum.
3. Install throttle body nuts.
- Torque: 8 Nm (71 inch lbs.)





4. Install rear manifold runner only. Route crankcase hoses, install throttle body heater hoses.





5. Install intake manifold plenum and install intake plenum boots.
6. Install install plenum bolts.
- Torque: 8 Nm (71 inch lbs.)





7. Install front manifold runner and tighten clamps.
8. Install front manifold runner bolts.
- Torque: 8 Nm (71 inch lbs.)