Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2000 >> LS2 V6-3.0L VIN R >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Knock Sensor >> Service and Repair >> Knock Sensor Bank 1
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Knock Sensor Bank 1




REMOVAL
1. Disconnect negative battery cable.
2. Remove alternator.
3. Remove belt tensioner.
4. Remove knock sensor bolt.
5. Disconnect knock sensor electrical connector and note wire routing.
6. Remove knock sensor.

INSTALLATION
1. Install knock sensor bolt.

Torque: 20 N.m (15 ft-lbs)

NOTE: Improper knock sensor routing can result in damage to the wire.

2. Route wire harness.
3. Connect knock sensor electrical connector.
4. Install belt tensioner.

Torque: 40 N.m (30 ft-lbs)

5. Install alternator.

Torque: 40 N.m (30 ft-lbs)

6. Install negative battery cable.
pro multis · About Operation CHARM