Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)

Transmission Speed Sensor: Service and Repair

REMOVAL

CAUTION: MAKE SURE THE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED ON HOIST.

1. Position vehicle on a hoist and raise vehicle.
2. Disconnect electrical connector.
3. Remove output speed sensor stud.
4. Remove output speed sensor from transaxle case.

IMPORTANT: Inspect O-ring for damage and replace if necessary.

5. Remove O-ring from output speed sensor.

INSTALLATION

1. Install O-ring onto output speed sensor.
2. Install output speed sensor into transaxle case.
3. Install output speed sensor stud.
Torque: 11 Nm (8 ft. lbs.)
4. Connect electrical connector.
5. Lower vehicle.