Brake Rotor/Disc
| BRAKE ROTORS | Brake Rotor Retaining Fastener | 35 Inch Pound-Force (in.lb) |
| Front | Lateral Runout | 0.001 Inch (in) |
| Thickness Variation | 0.0003 Inch (in) | |
| Diameter | 11.3 Inch (in) | |
| New Thickness (Nominal) | 0.98 Inch (in) | |
| Minimum Thickness After Refinish | 0.90 Inch (in) | |
| Discard Thickness *Brake drums and rotors have a discard diameter or thickness dimension cast into them. This is a wear dimension and not a refinish dimension. Any drum or rotor which does not meet the specification values should be discarded. | 0.87 Inch (in) | |
| Rear | Lateral Runout | 0.001 Inch (in) |
| Thickness Variation | 0.0004 Inch (in) | |
| Diameter | 11.25 Inch (in) | |
| New Thickness (Nominal) | 0.39 Inch (in) | |
| Minimum Thickness After Refinish | 0.35 Inch (in) | |
| Discard Thickness *Brake drums and rotors have a discard diameter or thickness dimension cast into them. This is a wear dimension and not a refinish dimension. Any drum or rotor which does not meet the specification values should be discarded. | 0.31 Inch (in) |