Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
Brake Light Switch: Service and Repair
REMOVAL1. Remove left lower I/P closeout panel (hush panel) push pins and remove.
2. Disconnect electrical connector.
3. Disconnect switch by rotating it 180 degrees and then pull out of bracket.
INSTALLATION
1. Install switch into bracket and rotate 180 degrees.
2. Install electrical connector.
3. Install left lower I/P closeout panel (hush panel).