Watertest Stand Specifications

WATER TEST STAND SPECIFICATIONS

TYPE OF NOZZLE - FULL CONE SPRAY WITH 60 INCLUDED ANGLE - "FULL JET" SPRAY NOZZLE NO.1/2 GG-25 OR EQUIVALENT.

NOZZLE HEIGHT - APPROXIMATELY 1 600 mm (63") FROM FLOOR

VOLUME OF FLOW - 14 LITERS (3.7 GALLONS) PER MINUTE

PRESSURE - 155 kPa (22 PSI) MEASURED AT NOZZLE

WINDSHIELD AND FRONT BODY PILLAR - APPROXIMATELY 30 DEGREES DOWN, 45 DEGREES TOWARDS REAR AND AIMED AT CORNER OF WINDSHIELD

SIDE - APPROXIMATELY 30 DEGREES DOWN, 45 DEGREES TOWARDS REAR AND AIMED AT CENTER OF REAR DOOR OR REAR QUARTER.

BACK WINDOW AND REAR COMPARTMENT LID - APPROXIMATELY 30 DEGREES DOWN, 30 DEGREES TOWARDS FRONT AND AIMED APPROXIMATELY 600 mm (24") FROM CORNER OF BACK WINDOW.

1. Windshield and Front Body Hinge Pillar
2. Side
3. Back Glass and Deck Lid