Front Seat Back - Squeaks
BULLETIN NO.: 00-T-48ISSUE DATE: September, 2000
CATEGORY TYPE: Body-15
CATEGORY: Seats
CORPORATION NO.: 00-08-50-010
SUBJECT:
Squeak Noise from Driver or Passenger Seat Back
(Install Seat Frame Insulator)
MODELS AFFECTED:
2000 and 2001 S-Series SC2, SL2, and SW2 Models up to and including VIN 1Z229725
CONDITION:
Some customers may comment about a squeak noise coming from the seat back on uplevel seats (both cloth and leather).
CAUSE:
Front seat back foam may rub against metal frame of seat back.
CORRECTION:
Use the following procedure to install seat frame insulator (P/N 21305329) over seat back frame.
PROCEDURE:
1. Remove seat back pad and seat cover.
^ For sedans and wagons, refer to "Sedan/Wagon Seat Back Pad and Seat Cover - SL2, SW2" removal procedure in the Seats section of the appropriate model year S-Series Body/Electrical (Volume II) service manual.
^ For coupes, refer to "Coupe Seat Back Pad and Seat Cover - SC2" removal procedure in the Seats section of the appropriate model year S-Series Body/Electrical (Volume II) service manual.
2. Install seat frame insulator (P/N 21305329) over seat back frame.
3. Install seat back pad and seat cover.
^ For sedans and wagons, refer to "Sedan/Wagon Seat Back Pad and Seat Cover - SL2, SW2" installation procedure in the Seats section of the appropriate model year S-Series Body/Electrical (Volume II) service manual.
^ For coupes, refer to "Coupe Seat Back Pad and Seat Cover - SC2" installation procedure in the Seats section of the appropriate model year S-Series Body/Electrical (Volume II) service manual.
PARTS REQUIREMENTS:
CLAIM INFORMATION:
To receive credit for this repair during the warranty coverage period, submit a claim through the Saturn Dealer System as shown.
Disclaimer