Service Procedure

CONSOLE ARMREST LATCH AND SHIM INSTALLATION

1. Open console armrest lid to full open position.

2. Remove console armrest latch retaining screw and latch.

3. Discard console armrest latch.

4. Remove adhesive backing from shim and install one half of the shim on each side of the latch support.

5. Install new console armrest latch and latch retaining screw.

Torque: 1.5 N-m (13.5 in-lbs)

6. Verify console armrest lid operation by opening and closing console armrest lid.

7. Affix Campaign Completion on a clean, dry surface of the radiator core support, in an area clearly visible when the hood is raised. (Refer to "Campaign Completion Label" information.)