Rear Washer Nozzle

REAR WASHER NOZZLE

REMOVAL




1. Remove liftgate window upper molding retainer. Pull firmly at attaching clip locations to disengage clips. Remove molding.
2. Remove center high mounted stop lamp (CHMSL) fasteners to remove CHMSL.




3. Remove rear washer nozzle attaching clip.
4. Disconnect rear washer nozzle hose and remove washer nozzle.

INSTALLATION

1. Connect rear washer nozzle hose.
2. Install rear washer nozzle to liftgate.
3. Install rear washer nozzle attaching clip to nozzle.




4. Install CHMSL.
5. Position liftgate window upper molding to vehicle. Push at attaching clip locations to engage clips.
6. Install retainers.