Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
59. Oil Pan Installation
OIL PAN INSTALLATION(UNIT REPAIR)
INSTALLATION
1. Make sure that oil pan and mounting surface on lower crankcase are free of all oil and debris.
IMPORTANT: Ensure that there is not any excessive RTV around oil pickup gallery flange area.
2. Apply a 2 mm bead of Loctite 5900 (P/N 21019581) around perimeter of the oil pan and suction port opening. Do not apply more than a 2 mm bead.
3. Install oil pan.
4. Install oil pan bolts finger tight then tighten using torque sequence.
Torque:
Oil Pan-to-Block Bolts: 25 Nm (18 ft. lbs.)