Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
52. Water Pump Installation
WATER PUMP INSTALLATION:(UNIT REPAIR)
INSTALLATION
Prior to installing the water pump read the entire procedure. Pay special attention to avoid part damage and to ensure proper sealing.
1. Install water pump assembly.
2. Install water pump bolts. Initially finger tighten bolts.
Torque:
Water Pump Bolts: 25 Nm (18 ft. lbs.)
3. Install the water feed tube.
4. Lubricate feed tube O-ring with silicone gel lubricant.
5. Install water feed tube by twisting and pushing toward water pump. Take care not to tear or damage O-ring.
6. Install thermostat housing to block bolts.
Torque:
Thermostat Housing-to-Block Bolts: 10 Nm (89 inch lbs.)
7. Apply thread sealant Loctite PST 5650 (or equivalent) to sensor threads.
8. Install engine coolant temperature sensor.
Torque:
Engine Coolant Temperature Sensor: 20 Nm (15 ft. lbs.)