Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Tail Lamp: Service and Repair
TAIL LAMPREMOVAL
1. Open rear decklid.
2. Remove fasteners from side of lamp assembly.
3. Gently pull the tail lamp housing straight back.
4. Disconnect harness assembly from tail lamp assembly.
INSTALLATION
1. Connect harness assembly to tail lamp assembly.
2. Align tail lamp to quarter panel and push gently forward until tab fits into quarter panel.
3. Tighten fasteners.
Torque:
Rear Tail Lamp-to-Rear Fender Fasteners: 3.5 N.m (31 in-lbs)
4. Close rear decklid.