Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Traction Control Switch: Service and Repair
TRACTION CONTROL SWITCHREMOVAL
1. Remove center trim plate by gently pulling rearward at top to disengage retaining clips.
2. Tilt trim plate sideways and disconnect traction control switch electrical connector.
3. Release traction control switch lock tabs and push switch through front of center trim plate.
INSTALLATION
1. Push traction through front of center trim plate until switch snaps into lock tabs.
2. Connect traction control switch electrical connector.
3. Push center trim plate into instrument panel to engage retaining clips.