Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or
click to submit anonymously
Tachometer
The
CKP sensor is used as an input for tachometer information. The CKP sensor sends the EI module an A/C voltage signal, which it converts to a Pulse Width Modulated
(PWM) 0 to 5 volt square wave received by the PCM. The PCM uses the PWM square wave from the EI module to calculate RPM. The PCM sends an averaged tachometer message to the I/P cluster over the Class II link every
100 ms. The PCM averages the tachometer information to ensure smooth tachometer fluctuations.