Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Main Bearing Cap Torque
Install the lower crankcase. Tap gently into place with-a suitable tool if necessary. Ensure it is aligned properly on the alignment dowels.
IMPORTANT: Always use new crankshaft bearing bolts.
Install and tighten crankshaft bearing bolts using, tightening sequence.
Torque:
Crankshaft Bearing Cap Initial Torque (Lower Crankcase-to-Block Bolts): 20 Nm (15 ft. lbs.) + 70°
Tighten lower crankcase perimeter bolts using tightening sequence.
Torque:
Lower Crankcase-to-Block Peripheral Bolts: 20 Nm (15 ft. lbs.)
Tighten crankshaft bearing bolts an additional 20° using tightening sequence.
Torque:
Crankshaft Bearing Cap Final Torque (Lower Crankcase-to-Block Bolts): Additional 20°