Operation CHARM: Car repair manuals for everyone.

12. Output Shaft Sleeve Removal

OUTPUT SHAFT SLEEVE REMOVAL

NOTICE: Do not remove the output shaft in the same manner as the stub shaft. In order to remove the output shaft, you must completely disassemble the transaxle. Removing the output shaft at this time will damage other transaxle components.





1. Remove snap ring.





2. Insert the legs of 5th Gear Remover SA9211T-2 under output shaft sleeve.
3. Tighten center bolt of SA9211T-2 down in order to pull the output shaft sleeve off the output shaft.
4. Remove and discard output shaft sleeve.The output shaft sleeve is not reusable.