Rear Bumper Fascia Replacement (Sedan)

Rear Bumper Fascia Replacement (Sedan)

Removal Procedure





1. Raise the rear compartment lid.
2. Remove the plastic retainers from the rear bumper filler.
3. Remove the plastic retainers, rear fascia bottom to fascia support brackets.
4. Remove the plastic retainers, wheelhouse liners to rear fascia.
5. Remove the fascia by sliding it rearward.
6. If replacing the fascia, transfer the following items:

* Fascia brackets
* Rear bumper filler




Installation





1. Install the fascia over the bumper sub-assembly. Engage the fascia ends (key slots) over the shoulder bolts extending down from the quarter panel and pushing the fascia forward to lock the fascia to the quarter panels.
2. Install the plastic retainers in wheelhouse liner to fascia ends.
3. Install the plastic retainers, rear fascia bottom to the fascia support brackets.
4. Align the bumper filler and install the plastic retainers.
5. Close the rear compartment lid.