P0217

The Coolant Temperature telltale on the Instrument Panel (I/P) cluster has the ability to illuminate as a result of an engine over temperature condition (P0217). The PCM will send a message to the I/P cluster over the Class II link to turn the Coolant Temperature telltale On if the Engine Coolant Temperature (ECT) or Transaxle Fluid Temperature (TFT) exceeds the temperature calibration value listed under DTC parameters.

DTC PARAMETERS
DTC P0217 will set if:
^ Engine Coolant Temperature (ECT) is greater than 118°C (244°F)
^ No other ECT sensor DTCs have been set

DTC P0217 diagnostics run continuously once the above conditions have been met.

DTC P0217 are type D DTCs.

DIAGNOSTIC AIDS
Possible causes of DTC P0217:
^ Cooling fan inoperative
^ Engine cooling system overheated condition (thermostat, low engine coolant etc.)
^ Radiator or condenser air flow restricted
^ Air dam missing or loose
^ Overload due to trailer towing
^ ECT sensor leaking engine coolant into ECT sensor harness connector causing elevated temperatures
^ ECT sensor skewed

Refer to ECT Sensor General Description for a Temperature vs. Resistance chart.

The PCM will command the A/C relay Off if the temperature of the engine coolant is greater than 118°C (244°F).