Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Body Side Window Replacement



Body Side Window Replacement

Removal Procedure





1. Remove the rear door trim panel.
2. Partially remove the upper door frame inner seal at the location of the stationary window.
3. Peel back the water deflector at bolt access hole and remove the bolt from the stationary window.
4. Remove the stationary window.



Installation Procedure


Notice: Refer to Fastener Notice in Cautions and Notices.

1. Install the stationary glass and fasten with the bolt.

Tighten the rear side door stationary window fastener to 11 N.m (97 lb in).

2. Replace the water deflector at the access hole location.
3. Install the upper door frame inner seal, sliding it down around the window.
4. Install the rear door trim panel.